Itineraries and Transfers (Using Connecting Airports) Available for Japan Domestic Flights

1. Itineraries Available for Japan Domestic Flights

Available for one-way or round-trip itineraries.
For itineraries with nonstop flights, up to one segment for one way, and up to two segments for a round trip. For itineraries with transfers (using connecting airports), up to two segments for one way, and up to four segments for a round trip.
The service will be applicable to flights boarding on/after May 19, 2026.

For round-trip itineraries, a combination of nonstop flights and transfers (using connecting airports) can be used.
For round-trip itineraries, the departure point and final return point must be in the same city.
Except for itineraries that can be made with Japan domestic flights, reservations must be made separately for each one way journey.
Depending on seat availability, it may be cheaper to make reservations separately for each segment.

Examples of Available Itineraries

Round-trip itineraries between the same airport or city

Outbound: Tokyo to Osaka
Inbound: Osaka to Tokyo

Point of arrival on outbound journey is different from the point of departure on inbound journey

Outbound: Tokyo to Fukuoka to (Traveling by car, railway, etc.) to Nagasaki
Inbound: Nagasaki to Tokyo

Round-trip itinerary with transfers (using connecting airports)

Outbound: Sapporo to Tokyo to Ishigaki
Inbound: Ishigaki to Tokyo to Sapporo

Examples of Not Available Itineraries

When the points of departure and arrival on the outbound and inbound journeys are all different

Outbound: Tokyo to Fukuoka
Inbound: Nagasaki to Osaka

When the point of departure on the outbound journey is different to the point of arrival on the inbound journey

Outbound: Tokyo to Fukuoka
Inbound: Fukuoka to Osaka

Round-trip itinerary containing more than four segments

Outbound: Sapporo to Tokyo to Okinawa to Ishigaki
Inbound: Ishigaki to Okinawa to Tokyo to Sapporo

2. Transfers (Using Connecting Airports)

When transiting between the departure point and final destination using a connecting airport specified by ANA, the journey is considered to be a single segment.

There are no restrictions on the use of connecting airports specified by ANA.
Transfers (using connecting airports) can be made on the following day if the layover is less than 24 hours.
- *
  
  Please contact the ANA Domestic Reservations and Customer Service Center if your connecting flight isn't listed.
Depending on the fare, settings for transfers (using connecting airports) may vary.
Transfers (using connecting airports) are available in both First Class and Economy Class. However, different classes cannot be used in the same itinerary with transfers (using connecting airports).